• Course
  • Vendor
  • Guaranteed To Run

The Designing Cisco Enterprise Networks (ENSLD) v1.0 course gives you the knowledge and skills you need to design an enterprise network.

  • Course Start Date: 2021-05-17
  • Time: 09:00:00 - 17:00:00
  • Duration: 5 Day(s)
  • Location: Virtual
  • Delivery Method(s): Virtual Instructor Led

This course is not currently active or has been cancelled.

The course may be available on a different date listed below.

Please call to get on waiting list
1-877-313-8881

Course Outline

Pre-Requisites

Before taking this course, you should have earned CCNA® certification or be familiar with:

Basic network fundamentals and building simple LANs
Basic IP addressing and subnets
Routing and switching fundamentals
Basic wireless networking concepts and terminology

Lessons

The Designing Cisco Enterprise Networks (ENSLD) v1.0 course gives you the knowledge and skills you need to design an enterprise network. This course serves as a deep dive into enterprise network design and expands on the topics covered in the Implementing and Operating Cisco® Enterprise Network Core Technologies (ENCOR) v1.0 course.

 

This course also helps you prepare to take the exam, Designing Cisco Enterprise Networks v1.0 (ENSLD 300-420), which is part of the CCNP Enterprise and Cisco Certified Specialist - Enterprise Design certifications.

Objectives

After taking this course, you should be able to:

  • Design Enhanced Interior Gateway Routing Protocol (EIGRP) internal routing for the enterprise network
  • Design Open Shortest Path First (OSPF) internal routing for the enterprise network
  • Design Intermediate System to Intermediate System (IS-IS) internal routing for the enterprise network
  • Design a network based on customer requirements
  • Design Border Gateway Protocol (BGP) routing for the enterprise network
  • Describe the different types and uses of Multiprotocol BGP (MP-BGP) address families
  • Describe BGP load sharing
  • Design a BGP network based on customer requirements
  • Decide where the L2/L3 boundary will be in your Campus network and make design decisions
  • Describe Layer 2 design considerations for Enterprise Campus networks
  • Design a LAN network based on customer requirements
  • Describe Layer 3 design considerations in an Enterprise Campus network
  • Examine Cisco SD-Access fundamental concepts
  • Describe Cisco SD-Access Fabric Design
  • Design an Software-Defined Access (SD-Access) Campus Fabric based on customer requirements
  • Design service provider-managed VPNs
  • Design enterprise-managed VPNs
  • Design a resilient WAN
  • Design a resilient WAN network based on customer requirements
  • Examine the Cisco SD-WAN architecture
  • Describe Cisco SD-WAN deployment options
  • Design Cisco SD-WAN redundancy
  • Explain the basic principles of QoS
  • Design Quality of Service (QoS) for the WAN
  • Design QoS for enterprise network based on customer requirements
  • Explain the basic principles of multicast
  • Designing rendezvous point distribution solutions
  • Describe high-level considerations when doing IP addressing design
  • Create an IPv6 addressing plan
  • Plan an IPv6 deployment in an existing enterprise IPv4 network
  • Describe the challenges that you might encounter when transitioning to IPv6
  • Design an IPv6 addressing plan based on customer requirements
  • Describe Network APIs and protocols
  • Describe Yet Another Next Generation (YANG), Network Configuration Protocol (NETCONF), and Representational State Transfer Configuration Protocol (RESTCONF)

Who Should Attend

  • Network design engineers
  • Network engineers
  • System administrators

 

Outline

  • Designing EIGRP Routing
  • Designing OSPF Routing
  • Designing IS-IS Routing
  • Designing BGP Routing and Redundancy
  • Understanding BGP Address Families
  • Designing the Enterprise Campus LAN
  • Designing the Layer 2 Campus
  • Designing the Layer 3 Campus
  • Discovering the Cisco SD-Access Architecture
  • Exploring Cisco SD-Access Fabric Design
  • Designing Service Provider-Managed VPNs
  • Designing Enterprise-Managed VPNs
  • Designing WAN Resiliency
  • Examining Cisco SD-WAN Architectures
  • Cisco SD-WAN Deployment Design Considerations
  • Designing Cisco SD-WAN Routing and High Availability
  • Understanding QoS
  • Designing LAN and WAN QoS
  • Exploring Multicast with Protocol-Independent Multicast-Sparse Mode
  • Designing Rendezvous Point Distribution Solutions
  • Designing an IPv4 Address Plan
  • Exploring IPv6
  • Deploying IPv6
  • Introducing Network APIs and Protocols
  • Exploring YANG, NETCONF, RESTCONF, and Model-Driven Telemetry

Lab Outline

  • Designing Enterprise Connectivity
  • Designing an Enterprise Network with BGP Internet Connectivity
  • Designing an Enterprise Campus LAN
  • Designing Resilient Enterprise WAN
  • Designing QoS in an Enterprise Network
  • Designing an Enterprise IPv6 Network

Cancellation Policy

Cancellations and/or transfers with full refund will be allowed up to 10 business days prior to the start date of the course. Cancellations and/or transfers must be submitted in writing via fax at 888-596-7378 or email. With approved cancellation, reenrollment must be completed within 6 months or funds will be forfeited. Cancellations and/or transfer notices received after 9 business days prior to the start day of a course are not permitted. If a student does not attend a class and the required notification was not provided, funds will be forfeited and a rescheduling of the course will not be allowed. Rescheduling of a class is only permitted any time before 10 business days prior to the class start date.

Training Location

Virtual Classroom
Your Address

Your City, Your Province
Canada   

About Skyline Advanced Technology Services

x

Skyline Advanced Technology Services provides comprehensive training for all Cisco technologies. From design, through implementation and troubleshooting, Skyline-ATS delivers Instructor Led Training (ILT) within Open Enrollment and Customized Onsite formats.  And to provide the finest hands-on experience possible, we have enriched all Cisco-certified Training Labs, to incorporate new features and functionality.  Our labs are a superset of the current Cisco labs, and we have vastly improved the content and enhanced operability. Skyline Advanced Technology Services has a long and distinguished history in partnership with Cisco for Instructor–Led Training and Curriculum Development.  As a Certified Cisco Learning Solutions Partner (CLSP), Skyline-ATS is closely aligned with Cisco Partner Development and Education (PDE), Learning@Cisco, and many other internal product teams. Over the past decade, these groups have contracted Skyline-ATS to develop numerous certified classes, for public open enrollment and private, end-user specific audiences. The classes we have developed span the entirety of Cisco technologies, disciplines and formats, including: Cisco Unified Communication, Contact Center Express, Security, Storage, Data Center, Wireless, Route / Switch and Cisco 3rd Party technologies. 

Skyline-ATS Course Development Advantage:

No other Cisco Learning Solutions Partner can offer the following:

  • Professionally trained course developers who focus, solely, on Cisco products, yet have a broad range of internetworking skills and knowledge base.
  • Our developers have "hands on experience" implementing Cisco hardware and providing real-world solutions, to corporate clientele.
  • Developers who not only author Cisco courses, but maintain leading-edge skills by delivering Cisco Instructor-led classes, directly, to a wide customer base, which enables close interaction with customers supporting production applications.

Skyline-ATS provides tremendous value-add for all Cisco-based networking education. From the depth and expertise of our instructors, to the quality of our labs, we provide the finest training available.

Our Instructors

  • Chosen by Cisco to develop and exclusively deliver the United States’ ACCELERATE Voice Training Program - For this four-week, in-depth program, we were tasked with quickly bringing Cisco Systems Engineers up to speed on new, complex voice technologies.
  • Possess considerable depth and knowledge in all aspects of Cisco Advanced Technology products, as well as all aspects of data networking - Our personnel average over 15 years of experience delivering Cisco solutions, and even more for data networking technologies.
  • Have either exclusively developed or contributed extensively to the development of many Cisco Certified courses (see Table in Section 3.1.1).
  • Are consultants, too.  When not in a classroom or developing curriculum, Skyline-ATS personnel are working, onsite, at customer locations, to implement actual production solutions.
  • Private Labs - We have built our own lab facility, for exclusive use by our students and instructors. Our students can be assured that there are no scheduling conflicts, no interruptions, and no issues.
  • State-of-the Art - Our labs are built and maintained with the latest hardware available. We pay close attention to physical configuration, topology, and software, and continually strive to create an environment that best reflects the challenges our students face, on a daily basis.

Training Provider Rating

No Reviews Yet

Course Reviews

No Reviews Yet

More Courses from Skyline Advanced Technology Services

SKYLINE ADVANCED TECHNOLOGY SERVICES
2021-05-17
Virtual
SKYLINE ADVANCED TECHNOLOGY SERVICES
2021-05-24
Virtual
SKYLINE ADVANCED TECHNOLOGY SERVICES
2021-06-07
Virtual
SKYLINE ADVANCED TECHNOLOGY SERVICES
2021-05-17
Virtual

More Courses in 'Cisco Network Security Engineer ' Category