• Course
  • Vendor
  • Guaranteed To Run

Gain the foundational knowledge and skills necessary to install, configure, and operate a small to medium-sized Cisco network.

  • Course Start Date: 2024-04-01
  • Time: 08:30:00 - 16:30:00
  • Duration: 5 days 08:30 AM - 04:30 PM
  • Location: Virtual
  • Delivery Method(s): Virtual Instructor Led

Course Outline

Pre-Requisites

The knowledge and skills that students are expected to have before attending this course are:

Basic computer literacy
Basic PC operating system navigation skills
Basic internet usage skills
Basic IP address knowledge

There are no formal prerequisites for CCNA certification, but you should have an understanding of the exam topics before taking the exam.

Network+​
Cisco Enterprise Foundations
Understanding Networking Fundamentals

Lessons

Gain the foundational knowledge and skills necessary to install, configure, and operate a small to medium-sized Cisco network.

CCNA - Implementing and Administering Cisco Solutions v1.0 teaches professionals how to install, operate, configure, and verify a basic IPv4 and IPv6 network. You’ll learn how to configure network components, such as a switch, router, and Wireless LAN Controller. You’ll also gain skills needed to manage network devices and identify basic security threats.

IS THIS THE RIGHT COURSE?

The knowledge and skills that students are expected to have before attending this course are:

  • Basic computer literacy
  • Basic PC operating system navigation skills
  • Basic internet usage skills
  • Basic IP address knowledge

There are no formal prerequisites for CCNA certification, but you should have an understanding of the exam topics before taking the exam.

Network+​

Cisco Enterprise Foundations

WHO SHOULD ATTEND?

Target candidates for this course include individuals seeking the CCNA – Cisco Certified Network Associate certification. The course is also appropriate for support technicians who are involved in the basic installation, operation, and verification of Cisco networks. Key job roles include entry-level network engineer, network administrator, network support technician, and help desk technician.

You should consider this course if you wish to perform the following job tasks:

  • Configure: Implement the identified solution by applying the planned implementation processes using Cisco IOS commands and applications in the correct order to the selected devices and portions of the network.
  • Verify: Use the appropriate show commands and applications to ensure that the solution was correctly implemented and is performing as desired.

WHAT YOU'LL LEARN

  • Identify the components of a computer network and describe their basic characteristics
  • Describe the features and functions of the Cisco IOS Software
  • Describe LANs and the role of switches within LANs
  • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
  • Install a switch and perform the initial configuration
  • Describe the TCP/IP internet Layer, IPv4, its addressing scheme, and subnetting
  • Describe the TCP/IP Transport layer and Application layer
  • Explore functions of routing
  • Implement basic configuration on a Cisco router
  • Explain host-to-host communications across switches and routers
  • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
  • Describe IPv6 main features, addresses and configure and verify basic IPv6 connectivity
  • Describe, implement and verify VLANs and trunks
  • Describe the application and configuration of inter-VLAN routing
  • Explain the basics of dynamic routing protocols and describe components and terms of OSPF
  • Explain how STP and RSTP work
  • Configure link aggregation using EtherChannel
  • Describe the purpose of Layer 3 redundancy protocols
  • Describe basic WAN and VPN concepts
  • Describe the operation of ACLs and their applications in the network
  • Configure internet access using DHCP clients and explain and configure NAT on Cisco routers
  • Describe the basic QoS concepts
  • Describe the concepts of wireless networks, which types of wireless networks can be built and how to use WLC
  • Describe network and device architectures and introduce virtualization
  • Introduce the concept of network programmability and SDN and describe the smart network management solutions like Cisco DNA Center, SD-Access and SD-WAN
  • Describe the management of Cisco devices
  • Describe the current security threat landscape
  • Describe threat defense technologies
  • Implement basic steps to harden network devices

Who should take this course?

This course is recommended for those pursuing their Cisco Certified Network Associate (CCNA) certification, which is the starting point for all Cisco network infrastructure certifications. It’s ideal for entry-level networking engineers, administrators and technicians who support, operate and install Cisco networks.

The new CCNA course and certification now prepares associate-level IT professionals with skills in network security, automation and programmability. You can build a foundation for a broad spectrum of IT careers with the new CCNA.

Key Course Details

  • This is an intensive, regular-hours boot camp. Participants should expect to be in class for 8 hours on each of the five days.

Lab time:

  • 60 hours total over 90 days.
  • Labs are one-to-one and on virtual machines.
  • Be sure to log out of labs during class. Any remaining lab time can be used after class for additional practice and review.

COURSE OUTLINE

  • Section 1: Exploring the Functions of Networking
  • Section 2: Introducing the Host-To-Host Communications Model
  • Section 3: Operating Cisco IOS Software
  • Section 4: Introducing LANs
  • Section 5: Exploring the TCP/IP Link Layer
  • Section 6: Starting a Switch
  • Section 7: Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets
  • Section 8: Explaining the TCP/IP Transport Layer and Application Layer
  • Section 9: Exploring the Functions of Routing
  • Section 10: Configuring a Cisco Router
  • Section 11: Exploring the Packet Delivery Process
  • Section 12: Troubleshooting a Simple Network
  • Section 13: Introducing Basic IPv6
  • Section 14: Configuring Static Routing
  • Section 15: Implementing VLANs and Trunks
  • Section 16: Routing Between VLANs
  • Section 17: Introducing OSPF
  • Section 18: Building Redundant Switched Topologies
  • Section 19: Improving Redundant Switched Topologies with EtherChannel
  • Section 20: Exploring Layer 3 Redundancy
  • Section 21: Introducing WAN Technologies
  • Section 22: Explaining Basics of ACL
  • Section 23: Enabling Internet Connectivity
  • Section 24: Introducing QoS
  • Section 25: Explaining Wireless Fundamentals
  • Section 26: Introducing Architectures and Virtualization
  • Section 27: Explaining the Evolution of Intelligent Networks
  • Section 28: Introducing System Monitoring
  • Section 29: Managing Cisco Devices
  • Section 30: Examining the Security Threat Landscape
  • Section 31: Implementing Threat Defense Technologies
  • Section 32: Securing Administrative Access
  • Section 33: Implementing Device Hardening

LABS OUTLINE

  • Discovery 1: Get Started with Cisco CLI
  • Discovery 2: Observe How a Switch Operates
  • Discovery 3: Perform Basic Switch Configuration
  • Discovery 4: Inspect TCP/IP Applications
  • Discovery 5: Configure an Interface on a Cisco Router
  • Discovery 6: Configure and Verify Layer 2 Discovery Protocols
  • Discovery 7: Configure Default Gateway
  • Discovery 8: Explore Packet Forwarding
  • Discovery 9: Troubleshoot Switch Media and Port Issues
  • Discovery 10: Troubleshoot Port Duplex Issues
  • Discovery 11: Configure Basic IPv6 Connectivity
  • Discovery 12: Configure and Verify IPv4 Static Routes
  • Discovery 13: Configure IPv6 Static Routes
  • Discovery 14: Configure VLAN and Trunk
  • Discovery 15: Configure a Router on a Stick
  • Discovery 16: Configure and Verify Single-Area OSPF
  • Discovery 17: Configure and Verify EtherChannel
  • Discovery 18: Configure and Verify IPv4 ACLs
  • Discovery 19: Configure a Provider-Assigned IPv4 Address
  • Discovery 20: Configure Static NAT
  • Discovery 21: Configure Dynamic NAT and PAT
  • Discovery 22: Log into the WLC
  • Discovery 23: Monitor the WLC
  • Discovery 24: Configure a Dynamic (VLAN) Interface
  • Discovery 25: Configure a DHCP Scope
  • Discovery 26: Configure a WLAN
  • Discovery 27: Define a RADIUS Server
  • Discovery 28: Explore Management Options
  • Discovery 29: Explore the Cisco DNA Center
  • Discovery 30: Configure and Verify NTP
  • Discovery 31: Create the Cisco IOS Image Backup
  • Discovery 32: Upgrade Cisco IOS Image
  • Discovery 33: Configure WLAN Using WPA2 PSK Using the GUI
  • Discovery 34: Secure Console and Remote Access
  • Discovery 35: Enable and Limit Remote Access Connectivity
  • Discovery 36: Configure and Verify Port Security

 

  • FASTLab 1: Implement the Initial Switch Configuration
  • FASTLab 2: Implement an Initial Router Configuration
  • FASTLab 3: Implement IPv4 Static Routing
  • FASTLab 4: Implement IPv6 Static Routing
  • FASTLab 5: Troubleshoot VLANs and Trunk
  • FASTLab 6: Implement Multiple VLANs and Basic Routing Between the VLANs
  • FASTLab 7: Improve Redundant Switched Topologies with EtherChannel
  • FASTLab 8: Implement Numbered and Named IPv4 ACLs
  • FASTLab 9: Implement PAT
  • FASTLab 10: Configure System Message Logging
  • FASTLab 11: Secure Device Administrative Access
  • FASTLab 12: Implement Device Hardening

Cancellation Policy

We require 16 calendar days notice to reschedule or cancel any registration. Failure to provide the required notification will result in 100% charge of the course. If a student does not attend a scheduled course without prior notification it will result in full forfeiture of the funds and no reschedule will be allowed. Within the required notification period, only student substitutions will be permitted. Reschedules are permitted at anytime with 16 or more calendar days notice. Enrollments must be rescheduled within six months of the cancel date or funds on account will be forfeited.

Training Location

Online Classroom
your office

your city, your province
your country   

About Global Knowledge

x

Global Knowledge is the world's leading learning services and professional development solutions provider. We deliver learning solutions to support customers as they adapt to key business transformations and technological advancements that drive the way that organizations around the world differentiate themselves and thrive. Our learning programs, whether designed for a global organization or an individual professional, help businesses close skills gaps and foster an environment of continuous talent development.

Training Provider Rating

This vendor has an overall average rating of 4.38 out of 5 based on 431 reviews.

I would never take another course that starts at 11AM and goes to 9PM again. The way the course was laid out really took away from ... Read more
x

I would never take another course that starts at 11AM and goes to 9PM again. The way the course was laid out really took away from the capturing of what was presented as it was 5-6 hours of watching a screen before getting to the actual labs. There has to be a better way to lay out this particular course. In my previous course, the lectures were broken up by labs which worked out fantastic and kept you engaged in the course. There were days when in order to actually complete the labs, would go over the 9PM day end time frame. Was able to get the primary labs done, but if you want to get all the content completed, you cannot complete it in the window of this course, you will need to come back on your own time.

No comment
No comment
Instructor was great
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
Wasn’t as advanced as I thought it would be. There was an issue when the day my course was the first time they used a new platfo ... Read more
x

Wasn’t as advanced as I thought it would be. There was an issue when the day my course was the first time they used a new platform.. from adobe to something called zoom; I had to call support line cause it stated our instructor wasn’t present. Thankfully I called cause everyone online was in the adobe virtual classroom waiting for what looked like a teacher who didn’t show up for class (IT didn’t get anything resolved until 10mins after start time). I felt like he was really getting hung up on very basic knowledge for the first half of the course (talking about how to create tabs and drag formulas as an example). I completed files a few times before he was done explaining. There was a scheduled fire drill for them (roughly 30mins)that also cut into our time, which wasn’t deducted from the hour lunch break or the two, fifteen min breaks. I also really wish he touched base more on the automating workbook functions portion which we barely did. I'm happy there were/are those study guides (learning videos) and exams to take on my own time that I hope after I've had the class are still available for me to learn from.

Course Reviews

No Reviews Yet