• Course
  • Vendor

You will gain an understanding of basic network functions, standards, and protocols, to prepare you to tackle advanced networking skills.

  • Course Start Date: 2024-04-22
  • Time: 08:30:00 - 16:30:00
  • Duration: 5 days 08:30 AM - 04:30 PM
  • Location: Virtual
  • Delivery Method(s): Virtual Instructor Led

Course Outline

Lessons

COURSE OVERVIEW

A strong foundation of basic networking concepts is fundamental to a successful career in information technology. Networking technologies underlie all IT activities and a strong comprehension of the hardware and protocols used to create networks is essential to future success. In this course, you will learn how to configure a workstation to connect to a network, analyze network traffic using a protocol analyzer, examine switch and router configurations, perform basic IPv4 addressing and subnetting, and research network security solutions. You will gain an understanding of basic network functions, standards, and protocols, to prepare you to tackle advanced networking skills.

WHAT YOU'LL LEARN

  • Basics of layered network protocols and compare the two primary reference models: OSI and TCP/IP
  • Inspect a structured cabling system, including the proper use and installation of UTP and fiber optic cables
  • Configure a workstation to connect to a network
  • Ethernet operations and the use of VLANs by examining the configuration and operation of switches on a network
  • Spanning Tree operation as a method of eliminating broadcast storms on a switched network
  • Configure a Wi-Fi router for operation on a SOHO network, including security, SSID, and Wi-Fi channel
  • Various IP addressing considerations, including binary to decimal conversion, dotted decimal notation, classful vs. classless addressing, private vs. public addresses, and the use of network masking
  • Create a subnet for a small network, selecting the correct masks for various situations to accommodate the current number of hosts in each subnet and to also allow for future growth
  • Operation of various TCP/IP protocols on a network, including connectionless and connection-oriented communications using UDP and TCP, translation between private and public addresses using NAT, and support protocols such as ARP, DNS, and DHCP
  • Router configurations to determine the function of various routing protocols, including RIP, IGRP, and OSPF, within and between networks
  • Various WAN technologies, including circuit switched solutions such as leased lines and packet switched solutions such as Carrier Ethernet, and determine the best WAN connectivity solution for a given corporate network
  • Use a protocol analyzer to capture and view network traffic, including e-mail, instant message exchanges, and web transactions
  • Basic network security implementations by testing the impact a router that has been configured as a firewall has on the flow of traffic through a network
  • Research the suitability of popular anti-malware suites for mitigating network security threats
  • Research Mobile Device Management (MDM) solutions to support BYOD deployments

OUTLINE

Classroom Live Outline

1. Introduction to Networking

  • What Is Network Computing?
  • Building Blocks of Networks
  • Network Infrastructure: Media
  • Network Infrastructure: Switches and Access Points
  • Network Infrastructure: Routers
  • Network Services
  • Network Types
  • Network Topologies
  • Locating Network Resources: Peer-to-Peer Networking
  • Locating Network Resources: Client-Server Networking
  • Virtual Computing
  • Cloud Computing
  • Module Review and Discussion Questions

2. Network Standards

  • Introduction
  • Standards Organizations
  • Example Standards Development Process
  • OSI Mode Overview
  • TCP/IP Model
  • Module Review and Discussion Questions

3. Physical Network Connections

  • Introduction
  • UTP Cabling
  • Fiber Optic Cabling
  • Wireless Connections
  • Module Review and Discussion Questions

4. Ethernet LANs

  • Introduction
  • NIC and MAC Addresses
  • Ethernet Standards
  • Ethernet Frame Structures
  • Ethernet Equipment Types
  • Ethernet Connectors
  • Ethernet Performance Issues
  • Module Review and Discussion Questions

5. Ethernet Switching

  • Introduction
  • Benefits of Switching
  • Switch Installations
  • Switch Operations Overview
  • Switch Loop Problems
  • Spanning Tree Protocol Overview
  • Configuring Switches
  • VLAN Overview
  • Link Aggregation
  • Troubleshooting
  • Module Review and Discussion Questions

6. Wireless LANs

  • Introduction
  • WLAN Standards: IEEE & Wi-Fi Alliance
  • WLAN Components
  • SSID
  • Wi-Fi Channels
  • Wi-Fi Speeds Overview
  • WLAN Security
  • WLAN Performance Issues
  • Module Review and Discussion Questions

7. IP Addressing

  • What Are Logical Addresses?
  • Binary Numbering
  • Dotted Decimal Notation
  • Three Types of IP Addresses
  • Classful Addressing
  • Assigning IP Addresses
  • Reserved Addresses
  • Private Addresses
  • Network Masking
  • Classless Addressing
  • Introduction to IPv6
  • Module Review and Discussion Questions

8. IPv4 Subnetting

  • Purpose of Subnetting
  • Subnet Communications
  • Subnet Mask Rules
  • The Art of Subnetting
  • The Science of Subnetting
  • Calculating Subnets
  • Four Key Addresses
  • Implementing the Plan
  • Subnetting Case Study
  • Variable-Length Subnet Masking
  • Module Review and Discussion Questions

9. TCP and UDP

  • Introduction
  • TCP and UDP Headers
  • Connection-Oriented vs. Connectionless Communications
  • Transmission Control Protocol
  • User Datagram Protocol
  • TCP and UDP Port Numbers
  • Network Address Translation
  • Module Review and Discussion Questions

10. Support and Management Protocols

  • Introduction
  • Address Resolution Protocol
  • Dynamic Host Configuration Protocol
  • Domain Name System
  • Internet Control Message Protocol (ICMP)
  • Internet
  • Group Management Protocol (IGMP)
  • Telnet
  • Simple Network Management Protocol (SNMP)
  • Legacy Protocols: NetBIOS and NetBEUI
  • Module Review and Discussion Questions

11. Routing

  • Routing Overview
  • Logical Segmentation
  • Static vs. Dynamic Routing
  • Routing Decision Process
  • Route Protocol Operation
  • Common Routing Protocols
  • Configuring Routers
  • Module Review and Discussion Questions

12. Wide Area Networks

  • Introduction
  • Evolution of WAN Technologies
  • Sources of WAN Solutions
  • Circuit Switched vs. Packet Switched
  • Circuit Switched WAN Solutions
  • Packet Switched WAN Solutions
  • Internet WANs
  • Module Review and Discussion Questions

13. Communications Protocols

  • Introduction
  • Electronic Mail
  • Instant Messaging
  • Voice over IP
  • Unified Communications
  • Module Review and Discussion Questions

14. Web Protocols

  • Introduction
  • Hypertext Transfer Protocol (HTTP)
  • Secure Sockets Layer (SSL)
  • Transport Layer Security (TLS)
  • Remote Desktop Protocols
  • File Transfer Protocol (FTP)
  • Module Review and Discussion Questions

15. Network Security

  • Introduction
  • Security Threats
  • Threat Mitigation
  • Developing a Security Plan
  • Module Review and Discussion Questions

16. Emerging Networking Technologies

  • Introduction
  • Improved Wireless Technologies
  • Enterprise Mobility
  • Internet of Things
  • Software Defined Networks
  • Keeping Up with New Technology
  • Module Review and Discussion Questions

LABS

Classroom Live Labs

Lab 1: Connect and Configure a Workstation
Lab 2: Protocol Analysis with Wireshark
Lab 3: Examine Current Switch Configurations
Lab:4 Examine Spanning Tree
Lab 5: Configure a Wi-Fi Router
Lab 6: IPv4 Addressing Considerations
Lab 7: Create a Subnet Plan for a Small Network
Lab 8: Examine Support Protocols
Lab 9: Examine Router Configurations
Lab 10: Recognize Application of Different WAN Technologies
Lab 11: Examine an E-Mail Message with Wireshark
Lab 12: Examine an Instant Message Exchange with Wireshark
Lab 13: Examine a Web Transaction with Wireshark
Lab 14: Test Firewall
Lab 15: Research Anti-Malware
Lab 16: Research MDM Software

WHO SHOULD ATTEND

New IT professionals who want to learn the basics of a structured, layered approach to networking, including the fundamentals of network hardware and components, network protocols, IP addressing and subnetting, and various tools used in network monitoring and troubleshooting. Ideal candidates include:

  • Entry-level and newly hired technical professionals, including PC support, help desk, and networking professionals
  • Sales and marketing professionals looking to increase their ability to communicate with technical professionals and increase sales
  • Technical professionals looking to strengthen core skill before pursuing advanced topics and certifications

 

Cancellation Policy

We require 16 calendar days notice to reschedule or cancel any registration. Failure to provide the required notification will result in 100% charge of the course. If a student does not attend a scheduled course without prior notification it will result in full forfeiture of the funds and no reschedule will be allowed. Within the required notification period, only student substitutions will be permitted. Reschedules are permitted at anytime with 16 or more calendar days notice. Enrollments must be rescheduled within six months of the cancel date or funds on account will be forfeited.

Training Location

Online Classroom
your office

your city, your province
your country   

About Global Knowledge

x

Global Knowledge is the world's leading learning services and professional development solutions provider. We deliver learning solutions to support customers as they adapt to key business transformations and technological advancements that drive the way that organizations around the world differentiate themselves and thrive. Our learning programs, whether designed for a global organization or an individual professional, help businesses close skills gaps and foster an environment of continuous talent development.

Training Provider Rating

This vendor has an overall average rating of 4.38 out of 5 based on 431 reviews.

I would never take another course that starts at 11AM and goes to 9PM again. The way the course was laid out really took away from ... Read more
x

I would never take another course that starts at 11AM and goes to 9PM again. The way the course was laid out really took away from the capturing of what was presented as it was 5-6 hours of watching a screen before getting to the actual labs. There has to be a better way to lay out this particular course. In my previous course, the lectures were broken up by labs which worked out fantastic and kept you engaged in the course. There were days when in order to actually complete the labs, would go over the 9PM day end time frame. Was able to get the primary labs done, but if you want to get all the content completed, you cannot complete it in the window of this course, you will need to come back on your own time.

No comment
No comment
Instructor was great
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
Wasn’t as advanced as I thought it would be. There was an issue when the day my course was the first time they used a new platfo ... Read more
x

Wasn’t as advanced as I thought it would be. There was an issue when the day my course was the first time they used a new platform.. from adobe to something called zoom; I had to call support line cause it stated our instructor wasn’t present. Thankfully I called cause everyone online was in the adobe virtual classroom waiting for what looked like a teacher who didn’t show up for class (IT didn’t get anything resolved until 10mins after start time). I felt like he was really getting hung up on very basic knowledge for the first half of the course (talking about how to create tabs and drag formulas as an example). I completed files a few times before he was done explaining. There was a scheduled fire drill for them (roughly 30mins)that also cut into our time, which wasn’t deducted from the hour lunch break or the two, fifteen min breaks. I also really wish he touched base more on the automating workbook functions portion which we barely did. I'm happy there were/are those study guides (learning videos) and exams to take on my own time that I hope after I've had the class are still available for me to learn from.

Course Reviews

No Reviews Yet