• Course
  • Vendor
  • Guaranteed To Run

The CCNA Routing and Switching Boot Camp is a composite course derived from ICND1 and ICND2 content merged into a single accelerated course. Overlapping content is eliminated and some content is rearranged for the purpose of course flow.

  • Course Start Date: 2019-08-05
  • Time: 09:00:00 - 21:00:00
  • Duration: 5 days 09:00 AM - 09:00 PM
  • Location: Virtual
  • Delivery Methods(s): Virtual Instructor Led

Course Outline

Pre-Requisites

A solid understanding of IPv4 and IPv6 based networks A basic knowledge of network subnetting and IP routing At least one year of networking experience

Lessons

The CCNA Routing and Switching Boot Camp is a composite course derived from ICND1 and ICND2 content merged into a single accelerated course. Overlapping content is eliminated and some content is rearranged for the purpose of course flow.

In this course, you will learn how to install, operate, configure, and troubleshoot basic IPv4 and IPv6 networks, including configuring a LAN switch, configuring an IP router, identifying basic security threats, understanding redundant topologies, troubleshooting common network issues, connecting to a WAN, configuring EIGRP and OSPF in both IPv4 and IPv6, understanding wide-area network technologies, and getting familiar with device management and Cisco licensing.

Key additions to this latest revision include an understanding of Quality of Service (QoS) elements and their applicability, how virtualized and cloud services will interact and impact enterprise networks, and an overview of network programmability with the related controller types and tools that are available to support software defined network architectures.

You will learn about the interactions and network functions of firewalls, wireless controllers and access points, along with additional focus on IPv6 and basic network security

A full suite of labs have been developed using the virtual IOS environment with flexible topologies that reinforce concepts with hands-on, guided discovery and challenge labs that align to each lesson module.

This course will enable you to:

  • Prepare for the CCNA Routing and Switching certification
  • Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
  • Interactions and network functions of firewalls, wireless controllers and access points
  • Develop core routing and switching networking skills to configure, monitor, and troubleshoot Cisco networks for increased effectiveness and optimal performance within SMB and Enterprise settings
  • how device management can be implemented using the traditional and intelligent ways
  • QoS, virtualization and cloud services, and network programmability related to WAN, access and core segments
  • Support Cisco network deployments and maintain these services in an on-going operational network.

Course exclusives:

  • This is an intensive, extended-hours boot camp. Participants should expect to be in class for 12 hours on each of the five days.
  • To help with your success, you will receive a free CCNA (200-125 CCNAX) voucher.
  • Lab time:

              -120 hours total over 180 days for CCNAX.
              -Labs are one to one and on Virtual Machines.
              -Be sure to logout of labs during class. Any remaining lab time can be used after class for additional practice and review.

Note: This course, like all Global Knowledge courses, is provided only to individuals sponsored by an employer (business, government agency, non-profit, etc.).
 

What You'll Learn
  • Network fundamentals and build simple LANs
  • Establish Internet connectivity
  • Manage and secure network devices
  • Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
  • Troubleshoot IP connectivity
  • Describe how to configure and troubleshoot EIGRP in an IPv4 environment, and configure EIGRP for IPv6
  • Configure and troubleshoot OSPF in an IPv4 environment and configure OSPF for IPv6
  • Characteristics, functions, and components of a WAN
  • How device management can be implemented using the traditional and intelligent ways.
  • QoS, virtualization and cloud services, and network programmability related to WAN, access and core segments.
Who Needs To Attend
  • Network administrators
  • Network support engineers
  • Network engineer associate
  • Network specialist
  • Network analyst
  • Cisco channel partners
  • Individual pursing the CCNA Routing and Switching certification

Course Outline:

1. Building a Simple Network

  • Exploring the Functions of Networking
  • Understanding the Host-to-Host Communications Model
  • Introducing LANs
  • Operating Cisco IOS Software
  • Starting a Switch
  • Understanding Ethernet and Switch Operation
  • Troubleshooting Common Switch Media Issues

2. Establishing Internet Connectivity

  • Understanding the TCP/IP Internet Layer
  • Understanding IP Addressing and Subnets
  • Understanding the TCP/IP Transport Layer
  • Exploring the Functions of Routing
  • Configuring a Cisco Router
  • Exploring the Packet Delivery Process
  • Enabling Static Routing
  • Learning Basics of ACL
  • Enabling Internet Connectivity

3. Summary Challenge

  • Establish Internet Connectivity
  • Troubleshoot Internet Connectivity

4. Implementing Scalable Medium-Sized Networks

  • Implementing and Troubleshooting VLANs and Trunks
  • Building Redundant Switched Topologies
  • Improving Redundant Switched Topologies with EtherChannel
  • Routing Between VLANs
  • Using a Cisco IOS Network Device as a DHCP Server
  • Understanding Layer 3 Redundancy
  • Implementing RIPv2

5. Introducing IPv6

  • Introducing Basic IPv6
  • Understanding IPv6 Operation
  • Configuring IPv6 Static Routes

6. Troubleshooting Basic Connectivity

  • Troubleshooting IPv4 Network Connectivity
  • Troubleshooting IPv6 Network Connectivity

7. Implementing Network Device Security

  • Securing Administrative Access
  • Implementing Device Hardening
  • Implementing Advance Security

8. Implementing an EIGRP-Based Solution

  • Implementing EIGRP
  • Implementing EIGRP for IPv6

9. Summary Challenge

  • Troubleshooting a Medium-Sized Network
  • Troubleshooting Scalable Medium-Sized Network

10. Implementing a Scalable OSPF-Based Solution

  • Understanding OSPF
  • Multiarea OSPF IPv4 Implementation
  • Implementing OSPFv3 for IPv6
  • Troubleshooting Multiarea OSPF

11. Implementing Wide-Area Networks

  • Understanding WAN Technologies
  • Understanding Point-to-Point Protocols
  • Configuring GRE Tunnels
  • Configuring Single-Homed EBGP

12. Network Device Management

  • Implementing Basic Network Device Management
  • Evolution of Intelligent Networks
  • Introducing QoS
  • Managing Cisco Devices
  • Licensing

13. Summary Challenge

  • Troubleshooting Scalable Multiarea Network
  • Implementing and Troubleshooting Scalable Multiarea Network
 

Labs:

Discovery Lab 1: Get Started with Cisco CLI
Discovery Lab 2: Perform Basic Switch Configuration
Discovery Lab 3: Observe How a Switch Operates
Discovery Lab 4: Troubleshoot Switch Media and Port Issues
Discovery Lab 5: Inspect TCP/IP Applications
Discovery Lab 6: Start with Cisco Router Configuration
Discovery Lab 7: Configure Cisco Discovery Protocol
Discovery Lab 8: Configure Default Gateway
Discovery Lab 9: Exploration of Packet Forwarding
Discovery Lab 10: Configure and Verify Static Routes
Discovery Lab 11: Configure and Verify ACLs
Discovery Lab 12: Configure a Provider-Assigned IP Address
Discovery Lab 13: Configure Static NAT
Discovery Lab 14: Configure Dynamic NAT and PAT
Discovery Lab 15: Troubleshoot NAT
Discovery Lab 16: Configure VLAN and Trunk
Discovery Lab 17: Troubleshoot VLANs and Trunks
Discovery Lab 18: Configure Root Bridge and Analyze STP Topology
Discovery Lab 19: Troubleshoot STP Issues
Discovery Lab 20: Configure and Verify EtherChannel
Discovery Lab 21: Configure a Router on a Stick
Discovery Lab 22: Configure a Cisco Router as a DHCP Server
Discovery Lab 23: Troubleshoot DHCP Issues
Discovery Lab 24: Configure and Verify HSRP
Discovery Lab 25: Troubleshoot HSRP
Discovery Lab 26: Configure and Verify RIPv2
Discovery Lab 27: Troubleshoot RIPv2
Discovery Lab 28: Configure Basic IPv6 Connectivity
Discovery Lab 29: Configure IPv6 Static Routes
Discovery Lab 30: Use Troubleshooting Tools
Discovery Lab 31: Configure and Verify IPv4 Extended Access Lists
Discovery Lab 32: Troubleshoot IPv4 Network Connectivity
Discovery Lab 33: Configure and Verify IPv6 Extended Access Lists
Discovery Lab 34: Troubleshoot IPv6 Network Connectivity
Discovery Lab 35: Enhance Security of Initial Configuration
Discovery Lab 36: Limit Remote Access Connectivity
Discovery Lab 37: Configure and Verify Port Security
Discovery Lab 38: Configure and Verify NTP
Discovery Lab 39: Configure External Authentication Using RADIUS and TACACS+
Discovery Lab 40: Configure and Verify EIGRP
Discovery Lab 41: Configure and Verify EIGRP for IPv6
Discovery Lab 42: Troubleshoot EIGRP
Discovery Lab 43: Configure and Verify Single-Area OSPF
Discovery Lab 44: Configure and Verify Multiarea OSPF
Discovery Lab 45: Configure and Verify OSPFv3
Discovery Lab 46: Troubleshoot Multiarea OSPF
Discovery Lab 47: Configure Serial Interface and PPP
Discovery Lab 48: Configure and Verify MLP
Discovery Lab 49: Configure and Verify PPPoE Client
Discovery Lab 50: Configure and Verify GRE Tunnel
Discovery Lab 51: Configure and Verify Single Homed EBGP

Challenge Lab 1: Summary Challenge Lab: 1
Challenge Lab 2: Summary Challenge Lab: 2
Challenge Lab 3: Implementing RIPv2
Challenge Lab 4: Implement IPv6 Static Routing
Challenge Lab 5: Troubleshooting IPv4 Connectivit
Challenge Lab 6: Troubleshooting IPv6 Connectivity
Challenge Lab 7: Securing Device Administrative Access
Challenge Lab 8: Implementing Device Hardening
Challenge Lab 9: Troubleshooting EIGRP
Challenge Lab 10: Summary Challenge Lab: 3
Challenge Lab 11: Summary Challenge Lab: 4
Challenge Lab 12: Troubleshooting OSPF

Cancellation Policy

We require 16 calendar days notice to reschedule or cancel any registration. Failure to provide the required notification will result in 100% charge of the course. If a student does not attend a scheduled course without prior notification it will result in full forfeiture of the funds and no reschedule will be allowed. Within the required notification period, only student substitutions will be permitted. Reschedules are permitted at anytime with 16 or more calendar days notice. Enrollments must be rescheduled within six months of the cancel date or funds on account will be forfeited.

Training Location

Online Classroom
your office

your city, your province
your country   

About Global Knowledge

x

Global Knowledge is the world's leading learning services and professional development solutions provider. We deliver learning solutions to support customers as they adapt to key business transformations and technological advancements that drive the way that organizations around the world differentiate themselves and thrive. Our learning programs, whether designed for a global organization or an individual professional, help businesses close skills gaps and foster an environment of continuous talent development.

Training Provider Rating

This vendor has an overall average rating of 4.39 out of 5 based on 424 reviews.

No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
Wasn’t as advanced as I thought it would be. There was an issue when the day my course was the first time they used a new platfo ... Read more
x

Wasn’t as advanced as I thought it would be. There was an issue when the day my course was the first time they used a new platform.. from adobe to something called zoom; I had to call support line cause it stated our instructor wasn’t present. Thankfully I called cause everyone online was in the adobe virtual classroom waiting for what looked like a teacher who didn’t show up for class (IT didn’t get anything resolved until 10mins after start time). I felt like he was really getting hung up on very basic knowledge for the first half of the course (talking about how to create tabs and drag formulas as an example). I completed files a few times before he was done explaining. There was a scheduled fire drill for them (roughly 30mins)that also cut into our time, which wasn’t deducted from the hour lunch break or the two, fifteen min breaks. I also really wish he touched base more on the automating workbook functions portion which we barely did. I'm happy there were/are those study guides (learning videos) and exams to take on my own time that I hope after I've had the class are still available for me to learn from.

No comment
No comment
No comment
No comment
It was difficult to practice on my PC while trying to watch the presentation online.
No comment
David was excellent!! I am very for having this course!!

Course Reviews

No Reviews Yet