- Professional Engineer (P.Eng) Exam Preparation Training
- Fundamentals of Engineering (FE) Exam Preparation - Morning Exam Session (32 PDHs)
- Course Outline
This program is designed for exam candidates who want to pass the fundamentals of engineering exam offered by APEGGA, APEGBC and NCEES. Conditions and regulations of the exam could be found on these associations' respective websites.
The FE exam is 8 hours in length: a four hour morning session and a four hour afternoon session. This workshop has been designed to train on how to answer the morning session exam questions which is common between all engineering disciplines: Civil Engineering, Electrical Engineering and Mechanical Engineering, etc. The morning session consists of general questions that all candidates answer. The afternoon session is discipline specific where the candidate is allowed to pick the discipline to complete (including an "Other Disciplines" category).
This course system is designed to follow both the content and format of NCEES for each exam. By utilizing the live class room sessions for your study, you increase comprehension and get a more flexible and focused review.
Who should attend:
APEGGA and APEGBC exam candidates, NCEES FE exam candidates and any one who wishes to refresh his/her engineering background in any of the offered modules. This workshop has been designed for people who are out of school for many years, who are not proficient with the material, who did not take all exam-subjects in school, who are not engineering majors and for who have forgotten "Everything".
Classroom Course Format:
Class room course format is composed of day lectures accompanied by assignments which will be an indicator of your success. At the end of all sessions an in-class or take home exam will be marked and returned to you to help you evaluate your passing chance in the real exam.
The live class room and distance teaching sessions are offered by engineers who have intensive teaching experience in the adult learning environment. Each subject will be reviewed fundamentally and by practice questions that simulate the real exam questions to let you live the exam mode at all stages.
Program Outline (according to NCEES FE exam regulations)
Morning Session Preparation:
Roots of equations
II. Engineering Probability and Statistics
Measures of central tendencies and dispersions (e.g., mean, mode, standard deviation)
Probability distributions (e.g., discrete, continuous, normal, binomial)
Estimation (e.g., point, confidence intervals) for a single mean
Regression and curve fitting
Expected value (weighted average) in decision-making
Oxidation and reduction
States of matter
Acids and bases
Equations (e.g., stoichiometry)
Metals and nonmetals
Terminology (e.g., memory types, CPU, baud rates, Internet)
Spreadsheets (e.g., addresses, interpretation, what if, copying formulas)
Structured programming (e.g., assignment statements, loops and branches, function calls)
V. Ethics and Business Practices
Code of ethics (professional and technical societies)
Agreements and contracts
Ethical versus legal
Public protection issues (e.g., licensing boards)
VI. Engineering Economics
Discounted cash flow (e.g., equivalence, PW, equivalent annual FW, rate of return)
Cost (e.g., incremental, average, sunk, estimating)
Analyses (e.g., breakeven, benefit-cost)
Uncertainty (e.g., expected value and risk)
VII. Engineering Mechanics (Statics and Dynamics)
o Resultants of force systems
o Concurrent force systems
o Equilibrium of rigid bodies
o Frames and trusses
o Centroid of area
o Area moments of inertia
o Linear motion (e.g., force, mass, acceleration, momentum)
o Angular motion (e.g., torque, inertia, acceleration, momentum)
o Mass moments of inertia
o Impulse and momentum applied to:
o Work, energy, and power as applied to:
VIII. Strength of Materials
Shear and moment diagrams
Stress types (e.g., normal, shear, bending, torsion)
Stress strain caused by:
o axial loads
o bending loads
Deformations (e.g., axial, bending, torsion) E. Combined stresses F. Columns G. Indeterminant analysis H. Plastic versus elastic deformation
IX. Material Properties
Corrosion mechanisms and control
o engineered materials
o ferrous metals
o nonferrous metals
X. Fluid Mechanics
Energy, impulse, and momentum equations
Pipe and other internal flow
XI. Electricity and Magnetism
Charge, energy, current, voltage, power
Work done in moving a charge in an electric field (relationship between voltage and work)
Force between charges
Current and voltage laws (Kirchhoff, Ohm)
Equivalent circuits (series, parallel)
Capacitance and inductance
Reactance and impedance, susceptance and admittance
Basic complex algebra
Thermodynamic laws (e.g., 1st Law, 2nd Law)
Energy, heat, and work
Availability and reversibility
Mixture of gases
- Prerequisites & Certificates
- Cancellation Policy
If you wish to withdraw from a course, you must advise us, in writing, including the official receipt. Our policies regarding refund are:
More than fifteen business days in advance: a full refund minus $50.00 administration charge.
Fifteen or less business days in advance: a transfer to another course or a credit, valid for one year, to another GIC course can be considered. Credits are transferable within your organization.
If the course has been running for more than 2 weeks, or after the course has started, an 80% credit towards another GIC course may be considered, if notice is received before the start date of the second session. After this time, no refunds or credits will be issued. If a speaker is not available due to unforeseen circumstances, another speaker of equal ability will be substituted.
GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations.
Refund Policy: Allow up to 30 days for refunds to be processed.
- Map & Reviews
Global Innovative Campus
[ View Provider's Profile ]
This course has not yet been rated by one of our members.
If you have taken a course through this vendor please log into your account and leave feedback for this vendor. You will be helping ensure our members get directed to the best training facilities.
This course currently does not have any dates scheduled. Please call 1-877-313-8881 to enquire about future dates or scheduling a private, in house course for your team.
This page has been viewed 323 times.