- Civil Engineering Training
- Civil Engineering Principles for non-Civil Engineers: Municipal Design (1.8 CEUs)
- Course Outline
Eighty percent of a municipalitys problems are caused by twenty percent of its sanitary sewers and storm water drainage systems. The best way to avoid the majority of future problems is to pay greater attention to them during the design phase. This 3-day workshop is intended for those who require better understanding of sanitary sewer and stormwater drainage systems design. The participant will be expected to complete a sanitary sewer and storm water drainage system design under instructor guidance by using first principle methods and/or design aids.
This course has been designed to enlighten anyone who is not a civil engineer with the basics of Municipal Engineering Design. There is no need for a civil engineering background as the civil engineering concepts will not be introduced in depth.
This course deals with basic aspects of three areas: Sanitary Sewer Design, Storm Water Design and Water Supply Systems. These include: the importance of these systems in municipalities, the geological and geotechnical aspects of the ground conditions, simple estimation of Sanitary and Storm Systems loads, and definition of peaking factors. The populations estimation methods with respect to Water supply systems are also introduced.
To understand the basics of sanitary, storm water and water supply systems design, to develop skills to understand and back analyze these systems for better performance understanding as to possibly suggest additions or replacements for existing systems.
The main objective of this workshop is to enable participants to participate efficiently in municipal systems evaluation and analyses. After completing the course participants should be able to understand the design of Sanitary sewer, Storm Sewer and Water supply and effectively contribute to their understanding of construction procedures. The course philosophy is to improve the participants knowledge about these systems. The information is supplied in a simple and systematic way, discussing topics where current knowledge is lacking and more understanding is needed.
Mechanical engineers, Electrical engineers; public works and construction department employees of federal, provincial and municipal governments and engineers responsible for large industrial, commercial or institutional facilities who must deal with different types of municipal systems; management staff and project managers.
Municipal engineers; public works directors; city engineers; superintendents of operations; wastewater system managers; safety inspectors and procurement officers from municipalities; consulting engineers; technicians and technologists; sewer construction contractors and other individuals who need a basic understanding of sanitary sewer , stormwater drainage and water supply systems design and are currently employed in the wastewater management field.
Civil engineering technicians, technologists; junior civil engineers and civil engineers of all levels who are looking to refresh their memory and gain a better understanding of Municipal Design aspects.
The course will be of interest to a wide range of practising engineers, mangers and administration staff at different stages in their careers. Familiarisation with civil engineering aspects is not required.
The three-day course will consist of a series of lectures and workshops. A workshop on Sewers Design will be given. You will receive comprehensive course notes with all design charts, graphs and data that will serve as reference for future use. You will receive training on three of the top commercial software available in the market for the design of sanitary and storm sewer systems (Storm CAD, Sewer CAD and Water Cad)
You will receive a limited edition version (academic version) of the CAD design software package and a reference book on Engineering Hydraulics application).
Standard engineering calculator with scientific functions
Laptop for software training (if available)
After Attending This Workshop You Will Be Able To:
Understand the fundamentals of sanitary, storm water sewer and water distribution systems
Participate effectively in any engineering meeting to discuss these systems
Analyze existing systems and find out existing problems
Learn the design software WaterCad with numerous design examples
Understand basics of systems design and application
Understand how to perform Back an analysis of existing systems for any possible problems
Learn how to use the commercial package Sewer CAD and Storm CAD
Discover the numerous issues to consider when planning sewer and stormwater drainage and water supply systems at a given site
Learn to design sanitary sewer and storm water drainage systems to meet given planning objectives
Program Outline (1.8 CEUs / 18 PDHs)
Sanitary Sewer System
Planning For a Sanitary Sewer System
Environmental assessment process
Hydrology and Hydraulics
Gravity flow in pipes
Non-uniform open channel flow
Computer applications in hydraulics
The hydrologic cycle
Rainfall and surface water
Sanitary Sewer System Design
Minimum and maximum velocities
Minimum pipe size
Separation of water main and sewers
Optimum bedding conditions
Ductile iron pipe location
Workshop I - Design of a Sanitary Sewer
Participants will work on a design exercise in small groups under instructor guidance
Sanitary Sewer Systems
Extended period simulation
Sewer CAD introduction
Sewer CAD software demo training
Water CAD software demo training
Stormwater Drainage System
Estimating Storm Runoff
Rain fall intensity
Time of concentration
Effects of land developments
Layout and design
Best management practices
Storm Water Quality Control
Control of Combined Sewer Overflow (CSO)
Workshop II - Design of Stormwater Drainage System
Participants will work on a design exercise in small groups under instructor guidance
Sanitary Sewer and Pump Stations
General pump station design
Self-priming pump station
Submersible pump station
Pumps and motors
Wet well design criteria
Pump station site
Pump station spare parts and completion
Pump Head Curve
System Head Curve
Pump Operating Point
Hands on Examples
Types of Distribution Reservoirs
Flow in Pipe networks
Pipes in Series/Parallel
Pipe Network Analysis
Hydraulics of Water wells
Pressure Piping Systems and water Quality Analysis
Energy Gains- Pumps
Dr. Gamal Abdelaziz, P.Eng, MSc. has a Ph.D. in Geotechnical Engineering from Concordia University, Montreal, Canada. Currently he is a senior geotechnical engineer with Global Engineering , Edmonton , Alberta , Canada and adjunct professor at Ryerson University, Toronto, Ontario. Dr. Abdelaziz has served as a senior geotechnical engineer at DST Consulting engineers, Sarafinchin Consulting, Trow Consulting and EBA engineering. He has over 25 years of experience in geotechnical and structural engineering, foundation design, teaching, research and consulting in Canada and overseas.
Dr. Abdelaziz is a former adjunct professor at University of Western Ontario, London, Ontario, Canada, visiting professor at Ryerson University, Toronto, Canada and part time professor at Seneca College, Toronto, Canada. Dr. Abdelaziz is specialized in numerical modeling for solving sophisticated geotechnical engineering problems with respect to pile foundation and the linear and nonlinear analysis of soil-structure interaction. He designed charts to predict pressures acting on tunnels, and developed analytical model for pile bearing capacity prediction.
Dr. Abdelaziz authored a number of technical papers and delivered numerous internal and external workshops on various geotechnical and Municipal engineering topics, and they are very well received by practitioners. Dr. Abdelaziz has been involved in a number of projects in Canada and overseas, such as tunnelling, silos, buildings, retaining structures, siphons, irrigation networks and many other civil engineering projects in terms of design and construction.
Dr. Abdelaziz has been teaching municipal design courses for P. Eng exam preparation and Professional Engineers for over 10 years in Canada, and abroad.
Dr. Abdelaziz is a member in different professional societies such as APEGGA, PEO, CGS, CDA, TAC and ABPA. He is also a reviewer for the Canadian Geotechnical Journal.
- Prerequisites & Certificates
1.8 CEUs / 18 PDHs
- Cancellation Policy
If you wish to withdraw from a course, you must advise us, in writing, including the official receipt. Our policies regarding refund are:
More than fifteen business days in advance: a full refund minus $50.00 administration charge.
Fifteen or less business days in advance: a transfer to another course or a credit, valid for one year, to another GIC course can be considered. Credits are transferable within your organization.
If the course has been running for more than 2 weeks, or after the course has started, an 80% credit towards another GIC course may be considered, if notice is received before the start date of the second session. After this time, no refunds or credits will be issued. If a speaker is not available due to unforeseen circumstances, another speaker of equal ability will be substituted.
GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations.
Refund Policy: Allow up to 30 days for refunds to be processed.
- Map & Reviews
Global Innovative Campus
[ View Provider's Profile ]
This course has not yet been rated by one of our members.
If you have taken a course through this vendor please log into your account and leave feedback for this vendor. You will be helping ensure our members get directed to the best training facilities.
This course currently does not have any dates scheduled. Please call 1-877-313-8881 to enquire about future dates or scheduling a private, in house course for your team.
This page has been viewed 235 times.