• Course
  • Vendor

The DCCNX - Configuring Cisco Nexus Switches v1.0 course shows you how to install, configure, and manage Cisco Nexus Series Switch platforms using Cisco NX-OS to support highly available, secure, scalable, and virtualized data centers.

  • Course Start Date: 2020-12-14
  • Time: 08:30:00 - 16:30:00
  • Duration: 3 days 08:30 AM - 04:30 PM
  • Location: Virtual
  • Delivery Method(s): Virtual Instructor Led
$3,149.00
REGULAR PRICE $3,937.00 Save $788.00
December 14th
Click for more dates
2 discount seats left!
or make an offer

Course Outline

Pre-Requisites

To fully benefit from this course, you should have the following knowledge and skills:

Familiarity with Cisco data center technologies
Understand networking protocols, routing, and switching

Lessons

Through expert instruction and hands-on practice, you will learn how to deploy Cisco NX-OS software features including networking, virtualization, security, storage services, system management and monitoring. You will also gain an introduction to automating Cisco Nexus devices using Cisco NX-OS Software programmability features.

WHAT YOU'LL LEARN

  • Describe the Cisco Nexus devices routing and forwarding
  • Describe OTV
  • Describe and configure VXLAN
  • Describe Locator/D separation protocol
  • Describe the key features of Cisco Nexus devices
  • Describe Cisco Intelligent Traffic Director
  • Describe QoS on Cisco Nexus devices
  • Understand Cisco Nexus storage services
  • Configure device alliaces and zoning
  • Configure FCoE
  • Configuring NPIV and NPV Modes
  • Describe NX-API and network orchestration solutions and program Cisco NX-OS with Python
  • Explain system management, monitoring, and troubleshooting processes
  • Explain the troubleshooting processes

OUTLINE

  • Describing the Cisco NX-OS Routing and Forwarding
    • Routing Overview
    • Multicast Routing
    • Cisco NX-OS Routing and Forwarding
    • Unicast and Multicast RIB and FIB
  • Describing Overlay Transport Virtualization
    • Cisco OTV Overview
    • Cisco OTV Control and Data Planes
    • Failure Isolation
    • Cisco OTV Features
    • Optimizing Cisco OTV
  • Describing Virtual Extensible LAN
    • VXLAN Benefits over VLAN
    • Layer 2 and Layer 3 VXLAN Overlay
    • VXLAN MP-BGP EVPN Control Plane
    • VXLAN Data Plane
  • Describing Locator/ID Separation Protocol
    • Locator/ID Separation Protocol
    • LISP VM Mobility
    • LISP ESM Multihop Mobility
    • LISP VPN Virtualization
  • Cisco Nexus Security Features
    • ACLs
    • Port Security
    • DCHP Snooping
    • Dynamic ARP Inspection
    • IP Source Guard
    • Unicast RPF
    • Traffic Storm Control
    • CoPP
  • Cisco Intelligent Traffic Director
    • Cisco ITD Overview
    • Cisco ITD Deployment Models
    • Cisco ITD Configuration and Verification
  • Describing QoS on Cisco Nexus Devices
    • QoS on Cisco Nexus Devices
    • Configure QoS on Nexus
    • Monitor QoS Statistics
  • Introducing Cisco Nexus Storage Services
    • Fibre Channel
    • Fibre Channel Flow Control
    • Fibre Channel Domain Initialization
    • Fibre Channel Addressing
    • FSPF Protocol
  • Configuring Device Aliases and Zoning
    • Distributed Device Alias Services Overview
    • Zoning Overview
    • Merge Zones Without Disruption
    • Recover from Zone Merge Failures
    • Enhanced Zoning
  • Configuring Fibre Channel Over Ethernet
    • Fibre Channel Over Ethernet
    • FCoE Requirements
    • Data Center Bridging
    • FCoE Addressing Scheme
    • FCoE Initialization Protocol
    • FCoE Port Types
    • Storage VDC
  • Configuring NPIV and NPV Modes
    • Cisco NPV Mode
    • N-Port ID Virtualization
  • Managing Automation and Programmability of Cisco Nexus Devices
    • Cisco NX-OS RESTful API
    • Network Orchestration
    • Programming Cisco NX-OS with Python
  • Configuring System Management and Monitoring
    • System Management Overview
    • System Monitoring Tools
  • Troubleshooting Cisco Nexus Switches
    • Cisco Nexus Troubleshooting Tools
    • Shell Access and Linux Containers
    • Memory and Packet Issues

LABS

  • Configure OSPF
  • Configure Cisco OTV
  • Configure VXLAN
  • Configure Cisco Nexus Security Features
  • Configure Basic Fibre Channel Features
  • Configure Device Aliases and Zoning
  • Confgure FCoE
  • Configure NPV
  • Manage Switch over Cisco NX-API
  • Program a Switch with Python
  • Configure System Management and Monitoring
  • Troubleshoot and Manage Switches Using Bash and Guest Shell

WHO SHOULD ATTEND

  • Data center systems engineers
  • Data center field engineers
  • Data center architects
  • Technical decision makers
  • Network architects
  • Cisco integrators and partners

Cancellation Policy

We require 16 calendar days notice to reschedule or cancel any registration. Failure to provide the required notification will result in 100% charge of the course. If a student does not attend a scheduled course without prior notification it will result in full forfeiture of the funds and no reschedule will be allowed. Within the required notification period, only student substitutions will be permitted. Reschedules are permitted at anytime with 16 or more calendar days notice. Enrollments must be rescheduled within six months of the cancel date or funds on account will be forfeited.

Training Location

Online Classroom
your office

your city, your province
your country   

About Global Knowledge

x

Global Knowledge is the world's leading learning services and professional development solutions provider. We deliver learning solutions to support customers as they adapt to key business transformations and technological advancements that drive the way that organizations around the world differentiate themselves and thrive. Our learning programs, whether designed for a global organization or an individual professional, help businesses close skills gaps and foster an environment of continuous talent development.

Training Provider Rating

This vendor has an overall average rating of 4.38 out of 5 based on 431 reviews.

I would never take another course that starts at 11AM and goes to 9PM again. The way the course was laid out really took away from ... Read more
x

I would never take another course that starts at 11AM and goes to 9PM again. The way the course was laid out really took away from the capturing of what was presented as it was 5-6 hours of watching a screen before getting to the actual labs. There has to be a better way to lay out this particular course. In my previous course, the lectures were broken up by labs which worked out fantastic and kept you engaged in the course. There were days when in order to actually complete the labs, would go over the 9PM day end time frame. Was able to get the primary labs done, but if you want to get all the content completed, you cannot complete it in the window of this course, you will need to come back on your own time.

No comment
No comment
Instructor was great
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
No comment
Wasn’t as advanced as I thought it would be. There was an issue when the day my course was the first time they used a new platfo ... Read more
x

Wasn’t as advanced as I thought it would be. There was an issue when the day my course was the first time they used a new platform.. from adobe to something called zoom; I had to call support line cause it stated our instructor wasn’t present. Thankfully I called cause everyone online was in the adobe virtual classroom waiting for what looked like a teacher who didn’t show up for class (IT didn’t get anything resolved until 10mins after start time). I felt like he was really getting hung up on very basic knowledge for the first half of the course (talking about how to create tabs and drag formulas as an example). I completed files a few times before he was done explaining. There was a scheduled fire drill for them (roughly 30mins)that also cut into our time, which wasn’t deducted from the hour lunch break or the two, fifteen min breaks. I also really wish he touched base more on the automating workbook functions portion which we barely did. I'm happy there were/are those study guides (learning videos) and exams to take on my own time that I hope after I've had the class are still available for me to learn from.

Course Reviews

No Reviews Yet

More Courses from Global Knowledge

More Courses in 'Cisco Routing and Switching Training' Category

GLOBAL KNOWLEDGE
2021-01-15
Virtual
GLOBAL KNOWLEDGE
2020-11-30
Virtual
SKYLINE ADVANCED TECHNOLOGY SERVICES
2020-12-14
Virtual