Learn: in:
» back to Search Results

Course rating of 0 Vendor rating of 0



 
Course Outline
Daily Schedule:
8:00 am - Registration first day only
8:30 am - Session begins
6:00 pm - Adjournment   Full day study starting 8 am –6 pm, Saturdays and Sundays for three weekends. This program is an intensive revision for the Fundamentals of Engineering (FE) exam afternoon session (Civil Engineering Discipline). Preparation over three weeks of duration, each session is composed of full day teaching classes every Saturday and Sunday.  You will be given assignments to solve and a final exam to measure your success percentage.    You will receive the course calendar by email after your registration.   Description:
This program is designed for exam candidates who want to pass the fundamentals of engineering exam offered by APEGGA, APEGBC and NCEES. Conditions and regulations of the exam could be found on these associations web sites.

The FE exam is 8 hours in length: a four hour morning session and a four hour afternoon session.  This workshop has been designed to train on how to answer the afternoon in the following stream: Civil Engineering. The morning session consists of general questions that all candidates answer. The afternoon session is discipline specific where the candidate is allowed to pick the discipline to complete (including a general category).   Objectives:
This course system is designed to follow both the content and format of NCEES for each exam. By utilizing the live class room sessions for your study, you increase comprehension and get a more flexible and focused review.   Who Should Attend:
APEGGA and APEGBC exam candidates, NCEES FE exam candidates and any one who wish to refresh his/her engineering background in any of the offered modules. This workshop is been designed for  people who are out of school many years, who are not proficient with the material, who did not take all exam-subjects in school, who are not engineering majors and for who have forgotten " Everything”.   Classroom Course Format:
Class room course format is composed of day lectures accompanied by assignments which will be an indicator of your success. At the end of all sessions an in-class or take home exam will be marked and returned to you to help you evaluate your passing chance in the real exam.   Special Features:
The live class room and distance teaching sessions are offered by professional engineers who have intensive teaching experience in the  adult learning environment.  Each subject will be reviewed fundamentally and by practice questions that simulate the real exam questions to let you live the exam mode at all stages.  
Program Outline (according to NCEES FE exam regulations)

Afternoon Session Preparation (Civil Engineering Discipline):

I. Surveying
• Angles, distances, and trigonometry
• Area computations
• Closure
• Coordinate systems (e.g., GPS, state plane)
• Curves (vertical and horizontal)
• Earthwork and volume computations
• Leveling (e.g., differential, elevations, percent grades)

II. Hydraulics and Hydrologic Systems
• Basic hydrology (e.g., infiltration, rainfall, runoff, detention, flood flows, watersheds)
• Basic hydraulics (e.g., Manning equation, Bernoulli theorem, open-channel flow, pipe flow)
• Pumping systems (water and wastewater)
• Municipal water distribution systems
• Reservoirs (e.g., dams, routing, spillways)
• Groundwater (e.g., flow, wells, drawdown)
• Sewer collection systems (storm and sanitary)

III. Soil Mechanics and Foundations
• Index properties and soil classifications
• Phase relations (air-water-solid)
• Laboratory and field tests
• Effective stress (buoyancy)
• Retaining walls (e.g., active pressure/passive pressure)
• Shear strength
• Bearing capacity (cohesive and noncohesive)
• Foundation types (e.g., spread footings, piles, wall footings, mats)
• Consolidation and differential settlement
• Seepage
• Slope stability (e.g., fills, embankments, cuts, dams)
• Soil stabilization (e.g., chemical additives, geosynthetics)

IV. Environmental Engineering
• Water quality (ground and surface)
• Air quality
• Solid/hazardous waste
• Sanitary sewer system loads
• Basic tests (e.g., water, wastewater, air)
• Environmental regulations
• Water treatment and wastewater treatment (e.g., primary, secondary, tertiary)

V. Transportation
• Streets and highways
o geometric design
o pavement design
o intersection design
• Traffic analysis and control
o safety
o capacity
o traffic flow
o traffic control devices

VI. Structural Analysis
• Force analysis of statically determinant beams, trusses and frames
• Deflection analysis of statically determinant beams, trusses and frames
• Stability analysis of beams, trusses and frames
• Column analysis (e.g., buckling, boundary conditions)
• Loads and load paths (e.g., dead, live, moving)
• Elementary statically indeterminate structures

VII. Structural Design
• Codes (e.g., AISC, ACI, NDS, AISI)
• Design procedures for steel components (e.g., beams, columns, beam-columns, tension members, connections)
• Design procedures for concrete components (e.g., beams, slabs, columns, walls, footings)

VIII. Construction Management
• Procurement methods (e.g., design-build, design-bid-build, qualifications based)
• Allocation of resources (e.g., labor, equipment, materials, money, time)
• Contracts/contract law
• Project scheduling (e.g., CPM, PERT)
• Engineering economics
• Project management (e.g., owner/contractor/client relations, safety)
• Construction estimating

IX. Materials
• Concrete mix design
• Asphalt mix design
• Test methods (e.g., steel, concrete, aggregates, asphalt)
• Properties of aggregates
• Engineering properties of metals    
 
Prerequisites & Certificates
Pre-Requisites

none

Certificates offered


Cancellation Policy
If you wish to withdraw from a course, you must advise us, in writing, including the official receipt. Our policies regarding refund are:

More than fifteen business days in advance: a full refund minus $50.00 administration charge.

Fifteen or less business days in advance: a transfer to another course or a credit, valid for one year, to another GIC course can be considered. Credits are transferable within your organization.

If the course has been running for more than 2 weeks, or after the course has started, an 80% credit towards another GIC course may be considered, if notice is received before the start date of the second session. After this time, no refunds or credits will be issued. If a speaker is not available due to unforeseen circumstances, another speaker of equal ability will be substituted.

GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations.

Refund Policy: Allow up to 30 days for refunds to be processed.

Map & Reviews
Global Innovative Campus
[ View Provider's Profile ]

Reviews
 

This course has not yet been rated by one of our members.

If you have taken a course through this vendor please log into your account and leave feedback for this vendor. You will be helping ensure our members get directed to the best training facilities.

need-to-train-a-group-banner

This course currently does not have any dates scheduled. Please call 1-877-313-8881 to enquire about future dates or scheduling a private, in house course for your team.

This page has been viewed 219 times.