Learn: in:
» back to Search Results

Course rating of 0 Vendor rating of 5

The course will provide Engineers and Technicians with information for the optimal selection, operation and maintenance of centrifugal and positive displacement pumps as well as positive displacement and dynamic compressors.

Course Outline
After participating in the seminar, you will be able to:

€¢ Gain an awareness of the performance characteristics of the various types of pumps and compressors.
€¢ Increase the reliability of your pumps and compressors after having understood their operational and maintenance aspects.
€¢ Develop an effective maintenance program after becoming familiar with the components of pumps and compressors.
€¢ Improve performance of your pumps and compressors with the increased appreciation of the influence of fluid flow and associated equipment.


Pumps and compressors are essential components in almost all industries in that they are required to meet system demands and operate reliably.   Failure to meet these requirements can have significant production (and hence cost) impacts.
By attending this course you will gain an understanding of the characteristics of various types of pumps and compressors and their components.  The course will provide Engineers and Technicians with information for the optimal selection, operation and maintenance of centrifugal and positive displacement pumps as well as positive displacement and dynamic compressors.


As part of this course, a workshop will be held on the development of justifiable, cost effective preventive maintenance activities for a pump.  This workshop will show you a method of developing a preventive maintenance program and will enable you to develop a list of preventive maintenance activities (and activity frequencies) that can be applied in your own facility.


To provide an understanding of the fundamentals of the operation and maintenance of various types of rotary and reciprocating pumps and compressors . 

Who Should Attend

Plant and facilities managers, engineers, technicians and supervisors who need to be familiar with the fundamentals associated with the operation and maintenance of pumps; Plant and facilities operations personnel; Managers, engineers, technicians and supervisors responsible for plants and facilities containing pumps and associated equipment. Stationary engineers; Consultants and contractors who need some familiarity with pumps.

Personnel in the food, chemical, petrochemical, pulp and paper, pharmaceutical, water utility and energy industries will find this course of particular interest.

Complimentary Text Book
Upon attending the course a text book entitled €~Compressed Air and Gas Handbook€(TM) will be provided. This text will complement the course material presented by providing comprehensive information on the application, production, treatment and distribution of compressed air.

Program Outline

Welcome, Introduction, Workshop Preview, Learning Outcomes and the Assessment Method

Preliminary Questions

Basic Theory of Liquid Flow
€¢ Pressure
€¢ Flow
€¢ Bernoulli€(TM)s equation
€¢ Example
€¢ Properties of fluids
€¢ Flow characteristics

Pump Regulations, Codes and Standards
€¢ General
€¢ API Pump Codes

Positive Displacement Pumps
€¢ Reciprocating
€¢ Diaphragm
€¢ Rotary
€¢ Flow control

Centrifugal Pumps
€¢ Components
€¢ Cavitation
€¢ Net positive suction head
€¢ Pump curves
€¢ Pump efficiency
€¢ Best efficiency point
€¢ Example
€¢ Impeller speed
€¢ Affinity laws
€¢ Example
€¢ Multi-pump systems
€¢ Flow control

Pump Seals
€¢ Packing
€¢ €~O€(TM) Rings 
€¢ Mechanical seals
€¢ Magnetic drive pumps

Pump/Pipe Systems
€¢ Determination of suction and discharge losses
€¢ Example
€¢ Water hammer

Pump Selection Considerations
€¢ Positive displacement versus centrifugal pumps
€¢ Pump selection
€¢ Procurement
€¢ Life cycle costing

Basic Theory of Compressed Gasses
€¢ Compression cycle
€¢ Pressure drop in compressed air lines

Compressor Regulations, Codes and Standards
€¢ Breathing Air
€¢ Noise
€¢ General Safety Requirements
€¢ Compressor Requirements
€¢ Pressure Vessels and Safety Valves
€¢ Testing
€¢ ISO

Types of Compressors
€¢ Positive displacement
€¢ Dynamic
€¢ Lubricant and lubricant free compressors
€¢ Compressor control

Associated Compressor Equipment
€¢ Filters
€¢ Intercoolers and aftercoolers
€¢ Dryers
€¢ Air receivers

Air Systems
€¢ Requirements
€¢ Basic design

Air Compressor Selection  Considerations
€¢ Specifications

Pump and Compressor Drives
€¢ Motors
€¢ Variable speed drives
€¢ Motor couplings

Common Pump and Compressor Components
€¢ Lubrication
€¢ Bearings
€¢ Safety and Relief valves
€¢ Guards
€¢ Types of materials

Maintenance of Pumps and Compressors
€¢ Vibration 
€¢ General maintenance considerations
€¢ General operational and safety considerations
€¢ Performance monitoring
€¢ Condition monitoring
€¢ Thermography

€¢ Development of preventive maintenance activities and frequencies for a pump.  This workshop will enable attendees to apply, review or
   revise the preventive maintenance applied to similar pumps installed in their own facilities.  

Questions and Answers and Feedback to Participants on Achievement of Learning Outcomes

Summary and Final Adjournment


Alan Powell
Mr. Alan Powell is a Program Director with EPIC (Educational Program Innovations Center) who has over 30 years experience in the maintenance of industrial facilities.  After graduating with a Master of Science degree in Engineering from the University of Manchester in England, he immigrated to Canada. During his career he has developed maintenance programs, introduced significant maintenance cost saving concepts and managed a process to revise the preventive maintenance program in many large facilities. He has authored and presented several papers on maintenance at national and international conferences.
Prerequisites & Certificates

Certificates offered

1.8 CEU / 18 PDH

Cancellation Policy
To withdraw from a course, you must send a request, in writing, with the official receipt to our office. Fifteen or more business days in advance: full refund less $50.00 administration charge. Five to fifteen business days in advance: non-refundable credit of equal value for any future EPIC seminar within one year. Credits are transferable within your organization. In case of an unexpected event occurring after this time, you may send someone else to take your place without any additional cost.
Map & Reviews
EPIC Educational Program Innovations Center
[ View Provider's Profile ]


This course has not yet been rated by one of our members.

If you have taken a course through this vendor please log into your account and leave feedback for this vendor. You will be helping ensure our members get directed to the best training facilities.

Here are some reviews of the training vendor.
The course was very well presented and the course instructor was absolutely amazing.
Reviewed by 2013
Our instructor, Stephen Lamming, was outstanding and a true expert in his field. He was able to complement the technical air monitoring information with practical real life examples which was highly beneficial. He is an excellent communicator and was highly interactive with the course attendees. This course was recommended to me because Stephen Lamming does an outstanding job. I was very impressed with this course and have subsequently recommended it to my colleagues.
Reviewed by 2012
Would have liked more interactive problem solving.
Reviewed by 2011

This course currently does not have any dates scheduled. Please call 1-877-313-8881 to enquire about future dates or scheduling a private, in house course for your team.

This page has been viewed 754 times.